FLHT - Electra Glide Standard (06-06) Baggers®

Race-Pro 4" Slip-Ons (Black on Black)

This product does not require an EO in California.By nature of its design,it is legal for sale and use in all 50 states. Replacement parts included
QUALIFIED MANUFACTURER DECLARED U.S. 50-STATE LEGAL EMISSIONS REPLACEMENT PART ON THE HARLEY-DAVIDSON® FL TOURING MODELS LISTED: CALIFORNIA FL TOURING MODELS: FUEL INJECTED 1995-2003, 2007 AND 2009-2016; CVO 2000-2003 AND 2009-2016. 49 STATE FL TOURING MODELS: CARBURETED 1995-2005; FUEL INJECTED 1995-2005, AND 2007-2016; CVO 2000-2005, AND 2009-2016.
These high performance 4-inch muffler bodies feature advanced acoustical tuning technologies for a deep rumbling sounds. The 4-inch round muffler front expands just aft of the steel clam shell clamp to 4.5-inches diameter.

The gloss black finish on the aluminum tip is matched with the gloss black finish on the laser-cut steel strap that tightly encircles the muffler and has built-in mounting points. With its unique strap the Race Pro looks like a radical departure from the norm, when in fact, the Race Pro mounts the same way as nearly every slip-on muffler from Cobra. The strap clamps tightly around the muffler and bolts to the bike's hanger mounts located beneath the saddlebags. PEM® fasteners in the wrap make mounting a simple task of threading in a bolt from the upper bracket into the Cobra strap.

The mufflers come with 3-inch cores encased in proprietary Cobra sound tuning materials with specific acoustical dampening and thermal insulation properties. The basso profondo notes are made possible because of class-leading resonance absorption and prevention.

The frequency and location of the perforation patterns in the high-flo cores creates significant sound scattering in the mid frequencies, which helps to enhance the low frequency tones. The high-flo core itself is a massive 3-inches in diameter which gives the muffler an aggressive look without the objectionable sound levels.

Like all Cobra exhausts the Race Pro slip-on mufflers are made in the U.S. and come with a limited lifetime warranty that even covers discoloration. They use precision laser cut mounting brackets and stainless steel clamps to mount to the stock headpipes or to Cobra's PowrPort Dual headpipes.

*Be sure to use the corresponding RB Black Head Pipe part number to ensure both exhaust components match perfectly

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES

  • $884.99
  • SKU:6218RBB

Emissions Notice

The state of California considers aftermarket exhaust systems to be legal replacement parts for non-catalyst equipped motorcycles and/or if slip-on mufflers are installed downstream of the OEM catalysts.

California does not allow the use of aftermarket systems that remove original equipment catalysts, (except for racing use only) unless the Air Resources Board has issued an Executive Order for that system.

For California riders we offer Air Resources Board approved Fi2000 R ARB units. (ARB E.O. No. D-633-1). All other Fi2000 models are not legal for street use in California.

spinn